Skip to main content
NetApp Response to Russia-Ukraine Cyber Threat
In response to the recent rise in cyber threat due to the Russian-Ukraine crisis, NetApp is actively monitoring the global security intelligence and updating our cybersecurity measures. We follow U.S. Federal Government guidance and remain on high alert. Customers are encouraged to monitor the Cybersecurity and Infrastructure Security (CISA) website for new information as it develops and remain on high alert.
NetApp Knowledge Base

Command Mapping between Cisco MDS and Brocade Switches

Views:
3,424
Visibility:
Public
Votes:
17
Category:
not set
Specialty:
metrocluster
Last Updated:

Applies to

  • Fabric MetroCluster 
  • Cisco 
  • Brocade 

Answer

Port commands:

Brocade  Cisco MDS
portCfgShow show interface
portCfgSpeed [slotnumber/]portnumber, mode config t
interface fcXX/XX
switchport speed XX
(XX=1000 for 1GB, 2000 for 2GB and Auto for auto-negotiate)

portDisable [slotnumber/]portnumber

config t
interface fcXX/XX
shutdown

portErrShow

portStatsShow

show interface

portPerfShow

show interface counters brief
portShow show interface brief

portStatsClear

clear counters interface fcXX/XX

trunkShow

trunkDebug

show interface trunk vsan XX
switchshow

show flogi database

show interface brief

Basic Zoning commands:

Brocade  Cisco MDS
zoneAdd zoneName, member;member zoneset <zoneset_name> vsan XX
zone <zone_name>
zoneCreate zonename, member; member config t
zone <zone_name> vsan XX
zoneDelete zonename

configt
no zone <zone_name> vsan XX

zoneRemove zonename, zoneMemberList

config t
zoneset <zone_name> vsan XX
no zone <zone_name>

zoneShow show zoneset
show zone status

cfgCreate

config t

zoneset <zoneset_name>  vsan XX

cfgDelete

clear zone database vsan XX

cfgRemove

config t
zoneset <zoneset_name> vsan XX
no member <zoneset_name>

cfgDisable

no zoneset activate <zoneset_name> vsan XX
cfgEnable zoneset activate <zoneset_name> vsan XX

cfgSave

copy running-config startup-config

cfgActvShow show zone status

 

Other commands:

Brocade  Cisco MDS

supportshow

supportsave

show tech-support

show tech-support brief

show tech-support details

errDump show logging
errClear clear logging logfile
errShow attach module XX
show port-config internal link-events
show logging
chassisName show switchname
chassisShow show hardware
configDefault write erase
configShow

show running-config

show startup-config

configUpload copy nvram:startup-config tftp://<ip-addr>/my-config
configDownload copy tftp://ip-addr/my-config nvram:startup-config
date
ate mmddhhmmyy
show clock
clock set
fabricShow show fcdomain domain-list vsan XX

reboot

hareboot

reload
switchUptime show system uptime
slotShow show module 

 

Additional Information

additionalInformation_text

 

Scan to view the article on your device

 

  • Was this article helpful?