Skip to main content
NetApp Knowledge Base

A220 initialize for MetroCluster failure with 16 internal disks not quarterly installed

Views:
207
Visibility:
Public
Votes:
0
Category:
fas-systems
Specialty:
hw
Last Updated:

Applies to

  • A220
  • MetroCluster

Issue

A220 initialize for MetroCluster configuration failure with 16 internal disks.

Initialize from boot menu will faill with below messages:

BOOTMGR: The system has 0 disks assigned whereas it needs 4 to boot, will try to assign the required number.
sanown_assign_X_disks: init boot assign with quarter shelf policy for shelf id: 0
sanown_assign_X_disks: assign disks from my unowned local site pool0 loop
sanown_assign_disk_helper: Assigned disk 0b.00.6
sanown_assign_disk_helper: Assigned disk 0b.00.7
sanown_assign_X_disks: MCC assign pool0 disks from local which is owned by other site node
sanown_assign_X_disks: assign pool0 disks from local site loop owned by other site node
sanown_assign_X_disks: assign pool0 disks from local site loop with unowned disks present

BOOTMGR: already_assigned=0, min_to_boot=4, num_assgined=2
BOOTMGR: Assigned 2 out of 4 disks requested

BOOTMGR: If the disk shelves are partially populated,
Follow best practice guidelines to populate disks in the right slots

 

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

Scan to view the article on your device