Skip to main content
NetApp Knowledge Base

Node Reporting Warning Predictive Failure Events

Views:
9
Visibility:
Public
Votes:
0
Category:
solidfire-chassis
Specialty:
solidfire
Last Updated:

Applies to

  • NetApp SolidFire Compute and Storage Nodes
  • NetApp H Series Compute and Storage Nodes

Issue

A VMware vSphere alarm and the IPMI/BMC Event Logs are presented with an Information, Warning, or Critical message as shown in the example below:

  • [Information]  [Device_Name_Status] [Device_Name] Predictive Failure - VIN_UV_WARNING - Asserted
  • [Critical]  [Device_Name_Status] [Device_Name] Device_Name Failure Detected - Output Overcurrent Fault - Asserted
  • [Warning]  [Device_Name_Status] [Device_Name] Predictive Failure - IOUT_OC_WARNING - Asserted
  • [Information]  [Device_Name_Status] [Device_Name] Predictive Failure - VIN_UV_WARNING - Asserted
  • [Critical]  [Device_Name_Status] [Device_Name] Device_Name Failure Detected - Output Overcurrent Fault - Asserted
  • [Warning]  [Device_Name_Status] [Device_Name] Predictive Failure - IOUT_OC_WARNING - Asserted

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.
Scan to view the article on your device