Skip to main content
NetApp Knowledge Base

What is the command and syntax to revert a LIF to its home node and port in clustered Data ONTAP?

Views:
2,727
Visibility:
Public
Votes:
3
Category:
ontap-9
Specialty:
core
Last Updated:

Applies to

  • ONTAP 9
  • Clustered Data ONTAP 8 

Answer

  • A LIF has been automatically or manually moved to a node and port combination which is not its configured default.
  • Commands run by an administrator, or link-events such as unplugging of a cable or a switch reboot might result in the cluster using a different node and/or port for the traffic associated with a LIF.

Check the LIFs status by running the following command:

::> net int show -fields home-node, home-port, curr-node, curr-port

If the values differ between home and current, and it is preferred to return the LIF to its home node and port, run the following command:

::> net int revert -vserver <vservername> -lif <lif name>

Note: During LIF migration, of which LIF reversion is a special case is designed to be minimally disruptive, the process might not be completely seamless, depending on proper configuration of broadcast domains, lack of network over-provisioning, switch redundancy, and so on. It is therefore advised to perform the process in a maintenance window if data is currently being served reliably with the LIF in question.

Additional Information

N/A

 

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.