Skip to main content
NetApp Knowledge Base

What are some of the Data ONTAP upgrade considerations for storage systems containing 32-bit data?

Views:
302
Visibility:
Public
Votes:
0
Category:
data-ontap-8
Specialty:
core
Last Updated:

 

Applies to

Data ONTAP 8.3

Answer

For storage systems running Data ONTAP 8.2.x, the 32-bit data must be removed before upgrading to Data ONTAP 8.3 and later, since 32-bit data support is removed from Data ONTAP 8.3 and later.

Failing to remove the 32-bit data and upgrading the storage system to Data ONTAP 8.3 might result in possible service outages requiring complex recovery procedures.

The 32-bit data can be present as follows:

  1. 32-bit aggregate
    Run the command node run * aggr status -v on the storage system, and if the output does not include 64-bit, then the aggregate is 32-bit. It must be upgraded to 64-bit before upgrading to Data ONTAP 8.3 and later.
  2. 32-bit volume
    Run the command volume show -block-type !64-bit -fields block-type or volume show -block-type 32-bit -fields block-type or node run * vol status -v. If the output does not include 64-bit, then the volume is in a 32-bit format.
  3. 32-bit snapshot
    Run the command volume snapshot show -fs-block-format !64-bit -fields fs-block-format to list the 32-bit snapshots. Even a 64-bit volume can have a 32-bit snapshot through SnapMirror.

For procedures to upgrade and remove the 32-bit data, see the following links:

Additional Information

 

 

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.
Scan to view the article on your device