How to add lines to a configuration file on the storage system using wrfile. The command wrfile does not have an option to Exit without Saving
- Last Updated:
This article describes how to add lines to a configuration file on the storage system using wrfile.
- No Common Internet File System Protocol (CIFS) or Network File System (NFS) access to the storage system, but the administrator needs to add an additional line to a configuration file on the storage system without editing the entire file.
- Typically, when using the
Ctrl-Cis used to save changes, disregarding the following:
read: error reading standard input: Interrupted system call.
Ctrl-C, there is no other key sequence available.