Skip to main content
NetApp Knowledge Base

unplugged the SAS port 0b cable, but it doesn't show offline

  1. Last updated
  2. Save as PDF
Views:
64
Visibility:
Public
Votes:
0
Category:
fas-systems
Specialty:
hw
Last Updated:

Applies to

  • AFF-A200
  • FAS2720
  • FAS2750

Issue

When each piece (0a, 0b) of the SAS cable connected to the controller is unplugged.
0a recognized the status of the "storage port show" command as offline on display,
0b was not recognized as offline.

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.
Scan to view the article on your device