Skip to main content
NetApp Knowledge Base

When can the LUN be brought online while the WAFLliron is in progress?

Last Updated:

Applies to



  • For an aggregate, all FlexVol volumes must be mounted before data can be served from any of the FlexVol volumes in the aggregate.
  • If the aggregate contains a FlexVol volume with LUNs, then all LUNs within that FlexVol volume must complete their Phase 1 checks before any LUN in that FlexVol volume can be brought online.
Phase 1
  • Verifies file system access by checking the necessary metadata. This includes checks of the aggregate metadata associated with each FlexVol volume contained in that aggregate, metadata tracking free space, and Snapshot copy sanity.
  • Phase 1 will check the aggregate first and then each FlexVol volume on that aggregate. After all FlexVol volumes within the aggregate are checked, the aggregate and FlexVol volumes will be mounted.

Additional Information

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.
Scan to view the article on your device