Skip to main content
NetApp Knowledge Base

Sunfire V1280 does not show new luns

Last Updated:

Applies to

  • ONTAP 9.5
  • SAN
  • Solaris 10u6
  • Emulex LP9802


  • The server does not show any of the new LUN's created and attached to it from the Netapp. Old luns are working fine.
[~] # /opt/NTAP/SANToolkit/bin/sanlun lun show | grep -i lun
[~] # /opt/NTAP/SANToolkit/bin/sanlun lun show | grep -i lun
[~] # uname -a
  • The issue is intermittent. The new luns attached are temperamental about whether they show or not.


Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.
Scan to view the article on your device