Skip to main content
NetApp Knowledge Base

SYSTEM_FLT_LED is ON even when there is no fault on AFF-A250

Last Updated:

Applies to

  • AFF-A250
  • Baseboard Management Controller(BMC) 15.4


SYSTEM_FLT_LED is ON even when there is no fault on system.

>system fru led show all
-- id -- -- name --             -- status --
   0       SYSTEM_ID_LED        off
   1       SYSTEM_FLT_LED       on
   2       DIMM1_FAULT_LED      off
   3       DIMM2_FAULT_LED      off
   4       DIMM3_FAULT_LED      off
   5       DIMM4_FAULT_LED      off
   6       RTC_COIN_FAULT_LED   off
   7       M2_SSD_FAULT_LED     off
   8       FAN1_FAULT_LED       off
   9       FAN2_FAULT_LED       off
   10      FAN3_FAULT_LED       off
   11      FAN4_FAULT_LED       off
   12      FAN5_FAULT_LED       off
   13      BBU_FAULT_LED        off
   14      PCM_ACT_LED          off
   15      PCM_LOCATE_LED       off
   16      PCM_CACHE_ACT_LED    off
   17      PCM_ATN_LED          off
   18      BBU_CHG_LED          off
   19      BBU_ACT_LED          off

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.
Scan to view the article on your device