Skip to main content
NetApp Knowledge Base

SP wrongly links up with 100Mbps even though the actual speed is 1Gbps

Last Updated:

Applies to

  • Service Porcessor (SP)
  • FAS8300


SP speed displays 100mb instead of 1gb.


NODE::> node run -node NODENAME sysconfig -a
        NetApp Release 9.7P3: Fri Apr 17 10:40:14 EDT 2020
        System ID: xxxxxxxxxx (node1); partner ID: xxxxxxxxxx (node2)
        System Serial Number: xxxxxxxxxx (node1)
        System Rev: B1
        System Storage Configuration: Multi-Path HA
        System ACP Connectivity: Inband Active
        All-Flash Optimized: false
        Capacity Optimized: false
        All SAN Array: false
        Backplane Part Number: 111-04200
        Backplane Rev: B0
        Backplane Serial Number: xxxxxxxxxx
        Service Processor           Status: Online
                Firmware Version:   13.2
                Mgmt MAC Address:   xx:xx:xx:xx:xx:xx
                Ethernet Link:      up, 100Mbps   <<<<<<< 1Gbps is normal
                Using DHCP:         no


Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.
Scan to view the article on your device


  • Was this article helpful?