Skip to main content
NetApp Knowledge Base

Panic occurs due to miniSAS HBA card fault on FAS8300

Views:
306
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
hw
Last Updated:

Applies to

FAS8300

Issue

Node panics with panic string:
 
PANIC: Uncorrectable Machine Check Error at CPU8. SKL_IIO Error: STATUS<0xbb80000000000e0b>(VALID,UC,EN,MISCV,PCC,S,AR,CORR_ERR_STATUS(0),CORR_ERR_CNT(0),MSCOD(0),MCACOD(0xe0b))MISC<0x0000000017000000>(UCR_BUS_LOG(23),UCR_DEVICE_LOG(0),UCR_FUNCTION_LOG(0),UCR_SEGMENT_LOG(0))IIO Machine Check from device(s):RPT(23,0,0):ErrSrcID(CorrSrc(0),UCorrSrc(0x1700)), PCI Device 1000:d1 in slot 1 on Controller. in process idle: cpu8 on release 9.7P11 (C) on Fri Apr 16 12:08:16 JST 2021
 
In SYSCONFIG-AC, the miniSAS HBA card is found in slot 1 on Controller:
 
sysconfig: slot 1 OK: X2072A: 4x12G miniSAS Controler HBA

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.

 

  • Was this article helpful?