Only partial partitioned disks can be recognized on one of the node after new setup

Last updated
Save as PDF
Share
1. Share
2. Tweet
3. Share

Views:: 44

Visibility:: Public

Votes:: 0

Category:: ontap-9

Specialty:: hw

Last Updated:

Applies to

ONTAP 9
Advanced Disk Partitioning (ADPv2)
AFF-C190A

Issue

Only 4 of partitioned disks are listed as spare disks while they are supposed to be 8 partitioned disks.

Example:

slot 0: SAS Host Adapter 0b (PMC-Sierra PM8070 rev. C, SAS, <UP>)

Firmware rev:       03.08.09.00

Base WWN:           5:00a098:00e8f08:b4

Temperature:        Not Available

Phy State:          [4] Enabled, 12.0 Gb/s

[5] Enabled, 12.0 Gb/s

[6] Enabled, 12.0 Gb/s

[7] Enabled, 12.0 Gb/s

00.0 : NETAPP   X382_S164A960ATE NA53 915.4GB 520B/sect (S5NXNA0R902215)

00.1 : NETAPP   X382_S164A960ATE NA53 915.4GB 520B/sect (S5NXNA0R801601)

00.2 : NETAPP   X382_S164A960ATE NA53 915.4GB 520B/sect (S5NXNA0R902161)

00.3 : NETAPP   X382_S164A960ATE NA53 915.4GB 520B/sect (S5NXNA0R902160)

00.20: NETAPP   X382_S164A960ATE NA53 915.4GB 520B/sect (S5NXNA0R902218)

00.21: NETAPP   X382_S164A960ATE NA53 915.4GB 520B/sect (S5NXNA0R902162)

00.22: NETAPP   X382_S164A960ATE NA53 915.4GB 520B/sect (S5NXNA0R902157)

00.23: NETAPP   X382_S164A960ATE NA53 915.4GB 520B/sect (S5NXNA0R801603)

Shelf 0: DS224-12  Firmware rev. IOM12E A: 0230  IOM12E B: 0230

Aggregate aggr0_C190B_02 (online, raid_dp, fast zeroed) (block checksums)

Plex /aggr0_C190B_02/plex0 (online, normal, active, pool0)

RAID group /aggr0_C190B_02/plex0/rg0 (normal, block checksums)



RAID Disk        Device          HA  SHELF BAY CHAN Pool Type  RPM  Used (MB/blks)    Phys (MB/blks)

---------        ------          ------------- ---- ---- ---- ----- --------------    --------------

dparity         0b.00.0P3        0b    0   0   SA:B   0   SSD   N/A 95764/196125696   95772/196142080 (fast zeroed)

parity          0b.00.1P3        0b    0   1   SA:B   0   SSD   N/A 95764/196125696   95772/196142080 (fast zeroed)

data            0b.00.2P3        0b    0   2   SA:B   0   SSD   N/A 95764/196125696   95772/196142080 (fast zeroed)

data            0b.00.3P3        0b    0   3   SA:B   0   SSD   N/A 95764/196125696   95772/196142080 (fast zeroed)





Pool1 spare disks (empty)



Pool0 spare disks



RAID Disk        Device          HA  SHELF BAY CHAN Pool Type  RPM  Used (MB/blks)    Phys (MB/blks)

---------        ------          ------------- ---- ---- ---- ----- --------------    --------------

Spare disks for block checksum

spare           0b.00.0P1        0b    0   0   SA:B   0   SSD   N/A 409828/839327744  409836/839344128 (fast zeroed)

spare           0b.00.1P1        0b    0   1   SA:B   0   SSD   N/A 409828/839327744  409836/839344128 (fast zeroed)

spare           0b.00.2P1        0b    0   2   SA:B   0   SSD   N/A 409828/839327744  409836/839344128 (fast zeroed)

spare           0b.00.3P1        0b    0   3   SA:B   0   SSD   N/A 409828/839327744  409836/839344128 (fast zeroed)

Partner disks



RAID Disk        Device          HA  SHELF BAY CHAN Pool Type  RPM  Used (MB/blks)    Phys (MB/blks)

---------        ------          ------------- ---- ---- ---- ----- --------------    --------------

partner         0b.00.2P2        0b    0   2   SA:B   0   SSD   N/A 409828/839327744  409836/839344128 (fast zeroed)

partner         0b.00.0P2        0b    0   0   SA:B   0   SSD   N/A 409828/839327744  409836/839344128 (fast zeroed)

partner         0b.00.3P2        0b    0   3   SA:B   0   SSD   N/A 409828/839327744  409836/839344128 (fast zeroed)

partner         0b.00.1P2        0b    0   1   SA:B   0   SSD   N/A 409828/839327744  409836/839344128 (fast zeroed)

A new data aggregate creats failure when to specify the diskcount more than 4.

Cluster1::> aggr create -aggregate aggr1_node2 -node node2 -diskcount 5

Error: command failed: Not enough spares on node node2.