Skip to main content
NetApp Knowledge Base

Node sensors output not working and failing BMC update at 10 and 93 percent

Views:
886
Visibility:
Public
Votes:
0
Category:
aff-series
Specialty:
hw
Last Updated:

Applies to

  • AFF-A220
  • FAS2750
  • BMC 11.5

Issue

  • The environtment sensors output fails in one node:
::> system environment sensors show -state fault
Warning: Unable to list entries on node <node1_name>. Timeout: Operation
"environment_sensors_iterator::next()" took longer than 25 seconds to
complete [from mgwd on node "<node_name>" (VSID: -1) to mgwd at
169.254.231.159]
Error: show failed: Timeout: Operation "environment_sensors_iterator::next()"
took longer than 25 seconds to complete [from mgwd on node
"<node1_name>" (VSID: -1) to mgwd at 169.254.231.159]
 
  • The BMC automatic or manual network-full firmware upgrade to 11.5 stops at 10%: 
::*> system service-processor image update-progress show
In Percent
Node Progress Start Time Done End Time
---------------- -------- ------------------- ------- -------------------
<node1_name>  no 7/10/2020 10:50:00 10 7/10/2020 10:50:40
<node2_name>  no - 0 -
2 entries were displayed.
 
RMPALMPC02::*> system service-processor image update-progress show -instance
Node: <node1_name>
Latest SP Firmware Update Start Timestamp: 7/10/2020 10:50:00
Latest SP Firmware Update Percentage Done: 10
Latest SP Firmware Update End Timestamp: 7/10/2020 10:50:40
Is Update in Progress: no
Node: <node2_name>
Latest SP Firmware Update Start Timestamp: -
Latest SP Firmware Update Percentage Done: 0
Latest SP Firmware Update End Timestamp: -
Is Update in Progress: no
2 entries were displayed.

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.