Skip to main content
NetApp Knowledge Base

Node in mixed path due to failed drive

Last Updated:

Applies to

  • All AFF systems
  • All FAS Systems


  • Controller reports storage in Mixed-Path

::> node run -node <node_name> sysconfig -a 

NetApp Release 9.7P11: Tue Jan 12 18:03:00 EST 2021
System ID: xxxxxxx (node1); partner ID: xxxxxx (node2)
System Serial Number: xxxxx (node1)
System Rev: B0
System Storage Configuration: Mixed-Path
System ACP Connectivity: Inband Active
SAS2/SAS3 Mixed Stack Support: all
All-Flash Optimized: true
Capacity Optimized: false
All SAN Array: false
Backplane Part Number: DS22412
Backplane Rev:
Backplane Serial Number: xxxxxx

  • One drive is not visible across all paths

::> storage show disk -fields path-count
disk    path-count
------- ----------
1.0.0   4
1.0.1   4
1.0.2   4
1.0.3   4
1.0.4   4
1.0.5   4
1.0.6   4
1.0.7   4
1.0.8   4
1.0.9   2
1.0.10  4 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.