Skip to main content
NetApp Knowledge Base

Multiple SAS connectivity errors in a 2 nodes stretch MetroCluster with Patch Panels

Views:
48
Visibility:
Public
Votes:
0
Category:
aff-series
Specialty:
metrocluster
Last Updated:

Applies to

  • 2 nodes stretch MetroCluster
  • Patch panels connecting nodes and shelves 

Issue

  • SAS host ports errors in EMS logs:
[node_name: dsa_worker3: callhome.hostport.disable:alert]: Call home for HOST_PORT_FAIL - Disabled by IOM
  • Rate unknown in a Phy for a SAS port 
slot 0: SAS Host Adapter 0b (Broadcom SAS3616W rev. 2, SAS, <UP>)
   Phy State:  [0] Enabled, 12.0 Gb/s                            
               [1] Enabled, 12.0 Gb/s                            
               [2] Enabled, Rate unknown                         
               [3] Enabled, 12.0 Gb/s                            
  • The issue remains after SAS cables replaced

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.