Skip to main content
NetApp Knowledge Base

How to identify the NVMe flash cache device type in the system

Last Updated:

Applies to

  • FAS2620
  • FAS2650
  • FAS2720
  • FAS2750
  • FAS8200
  • FAS8300
  • FAS8700
  • ONTAP 9
    • 9.3P19 and above
    • 9.5P14 and above
    • 9.6P8 and above
    • 9.7P4 and above
    • 9.8 and above


FAS systems use multiple NVMe Flash Cache devices which can be from different vendors, or different models from the same vendor.

This article explains how to identify the specific device used in a system to ensure the correct firmware is downloaded and upgraded.


Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.
Scan to view the article on your device