Skip to main content
NetApp Knowledge Base

HA interconnect shows down on single link on AFF A800 using QSFP AVAGO

Last Updated:

Applies to

  • A800
  • HA interconnect
  • Dual 40/100G Ethernet T62100-CR
  • FW revision or older


  • A single node in an HA pair shows a link down on the HA interconnect
Cluster::> set advanced
Cluster::*> ha interconnect port show
  (system ha interconnect port show)
                               Physical  Link
                Link           Layer     Layer      Physical   Physical  Active
Node            Monitor  Port  State     State       Link Up  Link Down  Link
--------------  -------  ----  --------  ---------  --------  ---------  ------
Node-01    off
                            0  linkup    active            2          1  true
                            1  linkup    active            2          2  true
Node-02    off
                            0  disabled  down              0          0  false
                            1  linkup    active            1          0  true
  •  sysconfig -a does not populate the transceiver information for this port
        slot 0: Dual 40/100G Ethernet T62100-MEZZ
               e0a MAC Address:    d0:39:ea:28:6a:5a (auto-100g_sr4-fd-up)
                   QSFP Vendor:         AVAGO       
                   QSFP Part Number:    332-00440
                   QSFP Serial Number:  AF2047GU01Y
               e0b MAC Address:    d0:39:ea:28:6a:62 (auto-unknown-fd-down)
                   QSFP Vendor:
                   QSFP Part Number:
                   QSFP Serial Number:

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.