Does the controller state have an Active-Stanby configuration?
Applies to
- FAS8200
- ONTAP9.1P10
Issue
- Check the HA status with the "
storage failover show" command.There is no Active-Stanby distinction.
Example:
cluster1::> storage failover show
Takeover
Node Partner Possible State
-------------- -------------- -------- -------------------------------------
node0 node1 true Connected to node1
node1 node0 true Connected to node0
2 entries were displayed.
"Sysconfig -a"log shows that it is composed of Multi-Path HA.
Example:
NodeA
NetApp Release 9.1P10: Tue Nov 14 05:43:47 PST 2017
System ID: **** (****01); partner ID: **** (****-02)
System Serial Number: **** (****-01)
System Rev: A3
System Storage Configuration: Multi-Path HA
System ACP Connectivity: Inband Active
NodeB
NetApp Release 9.1P10: Tue Nov 14 05:43:47 PST 2017
System ID: **** (****-02); partner ID: ****(****-01)
System Serial Number: **** (****-02)
System Rev: A3
System Storage Configuration: Multi-Path HA
System ACP Connectivity: Inband Active