Skip to main content

This Site will be down for up to 3 hours on December 2, 2023 from 8 PM - 11 PM PST, to deploy an infrastructure update.

NetApp Knowledge Base

Controller Fault LED is on and P1V05_PC is below low threshold (warn-low: 979 mV)

Last Updated:

Applies to

  • AFF A800
  • Baseboard Management Controller (BMC) 10.7


  • Controller attention LED ONamber.
  • system service-event showwarning.Example:
::> system controller service-event show
Node             ID  Event Location Event Description
---------------- --- -------------- ----------------------
node_name-2      1   Controller B   P1V05_PCH_STBY: Voltage Sensor 16 LNC
  • Sensor state is inwarn-low(979 mV)
::> system environment sensors show -state !normal
Node        Sensor         State    Value/Units Crit-Low Warn-Low Warn-Hi Crit-Hi
----        -------------- ------   ----------- -------- -------- ------- -------
node_name-2 P1V05 PCH STBY warn-low 979 mV      938      979      1101    1156

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.
Scan to view the article on your device