Skip to main content
NetApp Knowledge Base

Initializing TDP SnapMirror relationship displays "32-bit data error"

Last Updated:

Applies to

  • Data ONTAP 8.2.5 7-mode
  • SnapMirror


Attempting to initialize a TDP SnapMirror relationship fails with the following error message:

Error Message:
Snapmirror policy type:    A-sync Mirror
Snapmirror policy:         DPDefault
Relationship type:         TDP
Mirror Status:             Uninitialized
Healthy:                   False
Unhealthy Reason:          Transfer Failed
Transfer Error:            Source Volume [source IP:Vol name] Contains 32-bit data. Data transfer from a volume containing 32-bit data is not supported.


Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.
Scan to view the article on your device