Skip to main content
NetApp Knowledge Base

How default values for the Max/Min autosize and thresholds are set on SnapMirror destination volume?

  1. Last updated
  2. Save as PDF
Views:
1,693
Visibility:
Public
Votes:
0
Category:
snapmirror
Specialty:
dp
Last Updated:

Applies to

ONTAP 9

Answer

  • Maximum Autosize:  The same value as "Max FlexVol Size 64-bit" on Hardware Universe(HWU).
  • Minimum Autosize:  The same value as the volume size when creating a volume.
  • Autosize Shrink Threshold Percentage:  Set a value based on the following table.. 

Volume Size

 Grow Threshold Shrink Threshold
0 B <= volume size < 20 GB 85% 80%
20 GB <= volume size < 100 GB 90% 85%
100 GB <= volume size < 500 GB 92% 87%
500 GB <= volume size < 1TB 95% 90%
1 TB <= volume size 98% 93%

Additional Information

Add your text here.

 

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.