Skip to main content
NetApp Knowledge Base

Cluster Switch health monitor is reporting 'Invalid SNMP Setting' in 9.8 and later

  1. Last updated
  2. Save as PDF
Views:
1,079
Visibility:
Public
Votes:
0
Category:
fabric-interconnect-and-management-switches
Specialty:
hw
Last Updated:

Applies to

  • Cluster Network Switch
  • ONTAP 9.8

Issue

  • In ONTAP 9.8 and later, an attempt to create a cluster switch entry using the commands 'system cluster-switch create' or 'system switch ethernet create' fails with the following error message:

::> set advanced
::*> system switch ethernet create -device switch1 -address 10.10.10.1 -model OTHER -type cluster-network -is-monitoring-enabled-admin true
Error: SNMP validation request timed out. Verify that the "-community-or-username" value is valid.

  • The 'Reason' field of the 'system cluster-switch show' command output has the value 'Invalid SNMP Settings'
::> system cluster-switch show -type cluster-network
Switch Type Address Model
--------------------------- ------------------ ---------------- ---------------
switch1 cluster-network 10.10.10.1 N9K-C9336C-FX2
Serial Number: XXXXXXXX
Is Monitored: false
Reason: Invalid SNMP Settings
Software Version: Cisco Nexus Operating System (NX-OS) Software, Version
9.3(8)
Version Source: CDP/ISDP
  • There are no network connectivity issues between ONTAP and the switch

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.