Skip to main content
NetApp Knowledge Base

The validation of ANDU reports warning of LIFs are not hosted on a network port

  1. Last updated
  2. Save as PDF
Views:
496
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
core
Last Updated:

Applies to

ONTAP 

Issue

The validation of Automated Non-disruptive Upgrades (ANDU) reports the warning of LIFs are not hosted on a network port, however, both the LIFs and the ports show normal/up status.

Example:
::*> cluster image validate -version 9.3P18

It can take several minutes to complete validation...

WARNING: There are additional manual upgrade validation checks that must be performed after these automated validation checks have completed successfully.
Refer to the Upgrade Advisor Plan or "Performing manual checks before an automated cluster upgrade" section in the "Clustered Data ONTAP Upgrade Express Guide" for the remaining manual validation checks that need to be performed before update.
Failing to do so can result in an update failure or an I/O disruption.

Pre-update Check      Status     Error-Action
--------------------- ---------- --------------------------------------------
........
LIFs not hosted       Warning    Warning: LIFs "lif01" for Vserver
                                 "svm1","lif02" for Vserver
                                 "svm1" are not hosted on a network port.
                                 Action: To identify LIFs that are no longer
                                 hosted use the "network interface show
                                 -status-admin up -status-oper down" command
 
::*> network interface show -status-admin up -status-oper down
There are no entries matching your query.
 
::*> network interface show -vserver svm1
Logical Status Network Current Current Is
Vserver Interface Admin/Oper Address/Mask Node Port Home
----------- ---------- ---------- ------------------ ------------- ------- ----
svm1
        lif01 up/up 192.168.171.1/24 node1 a0a-111 true
        lif02 up/up 192.168.171.2/24 node2 a0a-111 true
2 entries were displayed.
 

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.