Skip to main content
NetApp Knowledge Base

Adding disks to an aggregate does not show correct disk count

Views:
216
Visibility:
Public
Votes:
0
Category:
metrocluster
Specialty:
metrocluster
Last Updated:

Applies to

  • MetroCluster
  • ONTAP 9.5
  • Adding disks to an existing aggregate

Issue

When attempting to add disks to an existing aggregate, the preview displayed is not showing correct disk count for the "Second plex": 
 

ClusterA::> storage aggregate add-disks -aggregate aggr1 -disklist 7.70.0,7.70.1,7.70.2,7.70.3,7.70.4,7.70.5 -mirror-disklist 6.20.0,6.20.1,6.20.2,6.20.3,6.20.4,6.20.5  -raidgroup rg0 -simulate true

Disks would be added to aggregate "aggr1" on node "Node1" in the following manner:

First Plex

  RAID Group rg0, 28 disks (block checksum, raid_dp)
                                                      Usable Physical
    Position   Disk                      Type           Size     Size
    ---------- ------------------------- ---------- -------- --------
    data       7.70.0                    SAS          1.63TB   1.64TB
    data       7.70.1                    SAS          1.63TB   1.64TB
    data       7.70.2                    SAS          1.63TB   1.64TB
    data       7.70.3                    SAS          1.63TB   1.64TB
    data       7.70.4                    SAS          1.63TB   1.64TB
    data       7.70.5                    SAS          1.63TB   1.64TB

Second Plex

RAID Group rg0, 6 disks (block checksum, raid_dp) <<<<<<<<<<<<<<<<<<<<<<<<<< Not showing all the disks in the plex
                                                      Usable Physical
    Position   Disk                      Type           Size     Size
    ---------- ------------------------- ---------- -------- --------
    data       6.20.0                    SAS          1.63TB   1.64TB
    data       6.20.1                    SAS          1.63TB   1.64TB
    data       6.20.2                    SAS          1.63TB   1.64TB
    data       6.20.3                    SAS          1.63TB   1.64TB
    data       6.20.4                    SAS          1.63TB   1.64TB
    data       6.20.5                    SAS          1.63TB   1.64TB
 

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.
  • Was this article helpful?