Skip to main content

This Site will be down for up to 3 hours on December 2, 2023 from 8 PM - 11 PM PST, to deploy an infrastructure update.

NetApp Knowledge Base

E-Series asynchronous mirror group suspended internally due to secondary mirror volume repository being full

Last Updated:

Applies to

  • NetApp E-Series
  • All Platforms


  • An asynchronous mirror group (AMG) goes into a suspended state.
  • To confirm the cause of the suspension, look for the following two entries in the MEL:
  • Event Type: 7C09

Description: An asynchronous mirror group secondary member repository is full - Volume SSID:0x0000c00f <--CRITICAL

  • Event Type: 7C35

Description: A mirror has stopped

  • Event Type: 7C02

Description: An asynchronous mirror group was suspended internally

  • Also, the following entry will be found in the Recovery Guru:


  • Within event type 7C35 - A mirror has stopped, the raw MEL data byte 0x94 is decoded to Asynchronous Mirror Group Member Failure Reason Code: MEL_RC_STOP_SEC_REPOSITORY_FULL(22)


Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.
Scan to view the article on your device