Skip to main content
NetApp Knowledge Base

Wrong reports E-Series Power supply failed CRITICAL

Views:
200
Visibility:
Public
Votes:
0
Category:
e-series-systems
Specialty:
esg
Last Updated:

Applies to

  • SG5712
  • Power Supplies Firmware 01.10

Issue

  • In this case, Power supply 1 failed was raised in STORAGE-ARRAY-PROFILE -- SHELVES:

Power Supplies Detected:  2

Power supply status:  Failed
Location:             Left
Part number:          114-00148+F1
Serial number:        Serial number
Date of manufacture:  Not Available

  • STATE-CAPTURE-DATA -- evfShowVol -- ssmShowSubTree shows PSU 1 status OK:

[Power Supply]
Status:                 Okay
Access Path Status:     Okay
Swapped?:               No
Predicted Fail?:        No
...
Slot:                   1
Parent Slot:            1
Relative Slot:          1
Relative Parent Locations: Enclosure(1) Support CRU(1)
...
Component Reported:     Yes
Error Rep When Missing: Yes
Attn Request / Attn On: No / No
...
Fault LED On?:          No
Additional Failure?:    No
Requested On?:          Yes
Off?:                   No
Has Power Input?:       Yes
DC Under Voltage?:      No
DC Failed?:             No
...
Firmware Revision:      01.10

  • After that, error message was disappeared, STORAGE-ARRAY-PROFILE shows Power supply status back to Optimal:

Power Supplies Detected:  2

Power supply status:  Optimal
Location:             Left
Part number:          114-00148+F1
Serial number:        Serial number
Date of manufacture:  Not Available

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.
  • Was this article helpful?