Skip to main content
NetApp Knowledge Base

E-Series failed disk pool volumes on SANtricity OS and later releases

Last Updated:

Applies to

  • NetApp E-Series
  • Dynamic Disk Pool (DDP)
  • Controller Platforms: E27xx, E56xx, E28xx, E57xx, EF300, EF600 and all associated EF-Series
  • SANtricity OS Controller Software (11.40.4) and later releases in that family (8.40)
  • SANtricity OS Controller Software (11.50.2) and later releases in that family (8.40)
  • All firmware releases in SANtricity OS 8.6x (11.60.x) and 8.x7 (11.70.x)


  • Failed volumes in dynamic disk pool(s)
  • Possibly one controller in degraded state due to cache reclaim. This is by design to preserve dirty write cache data for the failed volume(s).
  • If AutoSupport is enabled, a case will be opened with subject EVOFLT:E-Series Notification from <array name> (Volume failure) CRITICAL




Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.
Scan to view the article on your device