E-Series Asynchronous remote volume mirroring "ARVM" setup encounters error that data could not be loaded from the storage array
- Last Updated:
- E-Series Platforms: E28X0 and E57X0
- E-Series CFW: 08.40.x and above
When attempting to Create Mirrored pair or Consistency Group, an error is received before any further setup.
Data could not be loaded from the storage array. One possible cause is the object on which you you were performing the operation no longer exists. Other possible causes include network issues, inability to communicate with the controller, or loss of power to the storage array. Check these causes and then retry the operation.