MCCIP fail to assign disk automatically with error "BOOTMGR: If the disk shelves are partially populated"
Applies to
- MetroCluster IP
- FAS8300
Issue
- During 4-node MetroCluster IP initial installation, after performing option ‘9a’ to unown all disks and use the option "9c" to initialize/auto-assign disk. the following error messages report:
sanown_split_shelf_lock_disk_op:msg success op: RELEASE lock disk:5000039C:2852687C:00000000:00000000:00000000:00000000:00000000:00000000:00000000:00000000status: 0
sanown_split_shelf_lock_disk_op:msg success op: RELEASE lock disk:5000039C:2823FD00:00000000:00000000:00000000:00000000:00000000:00000000:00000000:00000000status: 0
sanown_split_shelf_lock_disk_op:msg success op: RELEASE lock disk:5002538B:01C4CD60:00000000:00000000:00000000:00000000:00000000:00000000:00000000:00000000status: 0
BOOTMGR:Assigned 0 out of 3 disks requested
BOOTMGR:If the disk shelves are partially populated,
Followbest practice guidelines to populate disks in the right slots
fm_run0:no local disks found & OFW channel is not up.
May 2321:51:14 [localhost:cf.fm.noMBDisksOrIc:error]: Could not find the localmailbox disks. Could not determine the firmware state of the partner throughthe HA interconnect.
Terminated
.
Uptime:3m6s
FM halt:Time 76120 ms, 11763101041330 cycles
Systemhalting...
BIOSVersion: 16.8
PEIstart.
- The disk shelf has been fully populated