Disks are not visible under FC port, when viewed in "sysconfig -a"
Applies to
- ONTAP 9.3P19 and earlier
- ONTAP 9.5P13 and earlier
- ONTAP 9.6P9 and earlier
- ONTAP 9.7P5 and earlier
- NetApp MetroCluster
- High-availability (HA)
- Switch SFPs, Atto FibreBridge SFPs and Storage System SFPs are working correctly
- Zoning is correct
Issue
Disk information does not show up under one FC port in "sysconfig -a".
Example:
slot 2: FC Host Adapter 2b (Emulex XE201 rev. 48, N-port, <UP>)
Board name: 111-02451
Serial Number: FC75033066
Firmware rev: 11.2.219.4
Host Port Id: 0x60100
FC Node Name: 2:000:00109b:3aa6b6
FC Port Name: 1:000:00109b:3aa6b6
SFP Vendor: BROCADE
SFP Part Number: 57-0000088-01
SFP Serial Number: HAA2174910020G5
SFP Capabilities: 4, 8 or 16 Gbit
Link Data Rate: 16 Gbit
Switch Port: SW_A2:1
slot 2: FC Host Adapter 2c (Emulex XE201 rev. 48, N-port, <UP>)
Board name: 111-02451
Serial Number: FC75033066
Firmware rev: 11.2.219.4
Host Port Id: 0x50200
FC Node Name: 2:000:00109b:3aa6ba
FC Port Name: 1:000:00109b:3aa6ba
SFP Vendor: FINISAR CORP.
SFP Part Number: FTLF8529P3BCV-EM
SFP Serial Number: PY71LMS
SFP Capabilities: 4, 8 or 16 Gbit
Link Data Rate: 16 Gbit
Switch Port: SW_A1:2
SW_A1:7.126L79 : NETAPP X371_S163A960ATE NA51 915.4GB 520B/sect (S396NX0JC34830)