Skip to main content
NetApp Knowledge Base

How to configure iSCSI connections on NetApp ASA-A20 using four separate /30 network segments for Hyper-V

  1. Last updated
  2. Save as PDF
Views:
14
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
san
Last Updated:

Applies to

  • ASA-A20
  • iSCSI protocol
  • Hyper-V

Description

  • Configure iSCSI connectivity between two Hyper-V servers and a NetApp ASA-A20 storage system.
  • Requirement to separate four iSCSI paths, each on a dedicated /30 IP subnet, connecting:
    1. Hyper-V #1 to Controller A (e2b port): 192.168.100.0/30
    2. Hyper-V #1 to Controller B (e2b port): 192.168.100.4/30
    3. Hyper-V #2 to Controller A (e4b port): 192.168.100.8/30
    4. Hyper-V #2 to Controller B (e4b port): 192.168.100.12/30
  • Each iSCSI path must use its own unique network segment for the purpose of path isolation and performance optimization.

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.