Skip to main content
NetApp Knowledge Base

Are there any difference settings for the multipath.conf file on Ubuntu 24.04 when using both AFF and ASA r2 iSCSI LUNs

  1. Last updated
  2. Save as PDF
Views:
81
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
san
Last Updated:

Applies to

  • NetApp AFF (AFF）
  • All SAN Array (ASA)
  • Ubuntu 24.04
  • iSCSI LUNs
  • Linux initiator

Answer

  • No, there are no different settings required for the multipath.conf file on Ubuntu 24.04 when using both AFF and ASA r2 iSCSI LUNs.
  • The settings for the multipath.conf file on Ubuntu 24.04 are suitable for both AFF and ASA r2 iSCSI LUNs.
  • Ubuntu 24.04 OS is compiled to recognize ONTAP LUNs and automatically set all configuration parameters correctly for both ASA and non-ASA configurations.
  • For Ubuntu 24.04, the /etc/multipath.conf file must exist, but no changes are required because Ubuntu 24.04 includes the necessary settings to recognize and correctly manage ONTAP LUNs.
  • The multipath -ll command can be used to verify the settings for an ONTAP LUN.
  • Ubuntu 24.04 OS is compiled to recognize ONTAP LUNs and automatically set all configuration parameters correctly for ASA and non-ASA configurations.

Additional Information

additionalInformation_text
NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.