Skip to main content
NetApp Knowledge Base

Why does a VLAN port show an MTU of 1496 when the broadcast-domain is set to another value?

  1. Last updated
  2. Save as PDF
Views:
968
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
nas
Last Updated:

Applies to

  • ONTAP 9

Issue

  • MTU of VLAN tagged interface(s) homed on IFGRP(s) are set to 1496 instead of the configured broadcast-domain MTU
  • The command "network port show" lists VLAN ports with an MTU of 1496.
  • The command "network port broadcast-domain show" lists the MTU of the broadcast-domain containing the affected port(s) as something else, such as 1500 or 9000.

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.