Skip to main content
NetApp Knowledge Base

Why available ports are not shown with the broadcast domain show command?

  1. Last updated
  2. Save as PDF
Views:
23
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
nas
Last Updated:

Applies to

ONTAP 9

Answer

  • Broadcast-domain show command will only display Ethernet or ifgroup ports
  • Port members of ifgroup will not be directly included in broadcast-domain list

See the example below where ports e0f and e0g are part of the a0a ifgroup configuration and are not displayed in the broadcast-domain command query.

Screenshot 2025-04-25 115026.png

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.