Skip to main content
NetApp Knowledge Base

Is it possible to use the same segment for SVM's Data LIF and Cluster Management LIF?

  1. Last updated
  2. Save as PDF
Views:
166
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
nas
Last Updated:

Applies to

ONTAP 9

Answer

It is possible to use the same segment (network segment) for SVM's Data LIF and Cluster Management LIF. However, as a best practice, it is generally recommended to use different segments.
Here are some considerations and best practices if you choose to use the same segment:

  1. Separate Broadcast Domains:

When using separate segments, it is recommended to use different Broadcast Domains.
This helps distribute broadcast traffic across segments, improving network performance and reducing traffic collisions.

  1. Avoid IP Address Duplication:

It is advisable to avoid using LIFs with duplicate IP addresses within the same segment.
Duplicate IP addresses can cause communication confusion and network issues.

  1. Routing Configuration:

If using the same segment, proper routing configuration is necessary.
This ensures that traffic follows the correct path and reaches the intended LIF.

  1. Security Considerations:

When using the same segment, it is important to configure security settings appropriately.
Use firewalls or access control lists (ACLs) as needed to restrict communication between the appropriate segments.

  1. Network Availability and Performance:

When using the same segment, pay attention to network availability and performance.
Evaluate the network bandwidth and traffic load within the segment and optimize the network infrastructure if necessary.

Additional Information

additionalInformation_text

 

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.