Linux Host Utility sanlun shows incorrect LUN information
Applies to
- Linux Host Utilities (HU) 7.1
- SLES 12 or later
- RHEL8 or later
- ONTAP 9
Issue
- After installing HU
sanlun lun show -p -v allshows incorrect LUN information:
ONTAP Path: svm_linux:/vol/suse_test/lun_suse_test
LUN: 0
LUN Size: 1t
Product: cDOT
Multipath Provider: Unknown
--------- ---------- ------- ------------ ---------------------------------------------- --------
host vserver host:
path path /dev/ chan: vserver major:
state type node id:lun LIF minor
--------- ---------- ------- ------------ ---------------------------------------------- --------
up primary sdfj 1:0:1:0 node-02_fc_6b 130:80
up secondary sddg 1:0:0:0 node-01_fc_6b 70:224
up primary sdbd 0:0:1:0 node-02_fc_6a 67:112
up secondary sda 0:0:0:0 node-01_fc_6a 8:0
- Installation displays warning messages:
# rpm -ivh netapp_linux_unified_host_utilities-7-1.x86_64.rpm
Preparing... ################################# [100%]
Warning: libdevmapper.so library not found, some sanlun commands may not work. Refer Linux Host Utilities Installation and Setup Guide for more details
Warning: libnl.so library not found, some sanlun commands may not work. Refer Linux Host Utilities Installation and Set up Guide for more details
Updating / installing...
1:netapp_linux_unified_host_utiliti################################# [100%]