Skip to main content
NetApp Knowledge Base

The storage disk replace command precheck fails with does not have enough spare capacity error message

  1. Last updated
  2. Save as PDF
Views:
134
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
cloud
Last Updated:

Applies to

 ONTAP 9

Issue

While using the storage disk replace command, the following error is seen:

cluster1::*> storage disk replace -disk 1.0.1 -action start -replacement 1.0.2
 

cluster1::*> event log show
Time                Node             Severity      Event
------------------- ---------------- ------------- ---------------------------
3/27/2023 13:46:41  cluster1-01      ERROR         mgwd: raid.disk.replace.job.failed:error: Failed to replace disk 1.0.1 with disk 1.0.2. Reason: Precheck failed:Disk "1.0.2" does not have enough spare capacity..

 

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.