Skip to main content
NetApp Knowledge Base

Ifgrp member ports show degraded while ifgrp shows reachable after upgrade to ONTAP 9.13.1

Views:
11,254
Visibility:
Public
Votes:
5
Category:
ontap-9
Specialty:
nas
Last Updated:

Applies to

  • ONTAP 9.13.1
  • ONTAP 9.13.1P1
  • ONTAP 9.13.1P2
  • interface group (ifgrp)

Issue

  • ifgrp is healthy
    • and at least 1 member port is degraded due to l2_reachability
    • and at least 1 member port is healthy

      Example:

::*> network port show
Node: node1
Port      IPspace      Broadcast Domain Link MTU  Admin/Oper  Status
--------- ------------ ---------------- ---- ---- ----------- --------
a0a       Default      Data             up   1500     -/-     healthy
a0a-100   Default      Data             up   1500     -/-     healthy
e0e       Default      -                up   1500  auto/10000 degraded
e0f       Default      -                up   1500  auto/10000 healthy

Note: Only member ports (e.g. e0e) are degraded, the ifgrp status and VLANs are healthy

::*> network port ifgrp show
        Port     Distribution                Active
Node    ifgrp    Function     MAC Address    Ports   Ports
------  -------  ------------ -------------- ------- ---------------
node1   a0a      ip           aa:bb:cc:dd:ee full    e0e,e0f

::> network port show -node node1 -port e0e -instance

Port: e0e
Link: up
MTU: 9000
[...]
Remote Device ID: Switch1
IPspace Name: Cluster
Broadcast Domain: Cluster
MTU Administrative: 9000
Port Health Status: degraded
Ignore Port Health Status: false
Port Health Degraded Reasons: l2_reachability

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.