Skip to main content
NetApp Knowledge Base

"sysconfig-ac" shows Flash Cache (PN X9170A) in slot 6-1 is not supported on model AFF-A700

  1. Last updated
  2. Save as PDF
Views:
342
Visibility:
Public
Votes:
0
Category:
fas-systems
Specialty:
HW
Last Updated:

Applies to

  • AFF-A700
  • ONTAP 9.6P5

Issue

  • EMS log reports Flash Cache PN X9170A in slot 6-1 is not supported on model AFF-A700.
cmds.sysconf.logErr:sysconfig: Flash Cache, 1.0TB NVMe SSD card (PN X9170A) in slot 6-1 is not supported on model AFF-A700.
 
  • "sysconfig-ac" shows PN X9170A in slot 6-1 is not supported on model AFF-A700E.
sysconfig: Flash Cache, 1.0TB NVMe SSD card (PN X9170A) in slot 6-1 is not supported on model AFF-A700.
 
  • "sysconfig -a" log.
slot 6: NVRAM (NVRAM 10)
		Revision:           B1
		Serial Number:      ***
		DIMM Size:          16384 MB
		Memory Size:        32768 MB
		Battery Status:     Battery sufficiently charged
		Running Firmware:   1.2.0
	slot 6: Interconnect HBA: Generic OFED Provider
		Port Name:          ic6a
		GID:                fe80:0000:0000:0000:0000:0000:0000:0104
		Base LID:           0x104
		Active MTU:         8192
	slot 6: HSL Interconnect
		Data Rate:          80 Gb/s (8X)
		Link State:         ACTIVE
	slot 6-1: Flash Cache NVMe
		Serial Number:      ******
		Part Number:        119-00207
		Hardware Revision:  B0
		Firmware Version:   NA00
		Model Name:         X9170A
		Capacity:           1024 GB
		State:              ok

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.