Skip to main content
NetApp Knowledge Base

iSCSI LUN's not being able to be seen by ESXi hosts

  1. Last updated
  2. Save as PDF
Views:
931
Visibility:
Public
Votes:
1
Category:
fas-systems
Specialty:
san
Last Updated:

Applies to

  • ONTAP 9
  • iSCSI
  • ESXi

Issue

Unable to establish iSCSI connections.

  • EMS:
Mon Dec 28 10:12:24 +0000 [acp-aff800-clus01-05: kernel: netinet.ethr.duplct.ipAdrr:error]: Duplicate IP address 10.16.xxx.xxx!! sent from Ethernet address: d0:94:66:xx:xx:xx.
 
  • VMware:
syslog.log:
2020-12-28T10:06:49Z iscsid: Shutdown Session: iqn.1992-08.com.netapp:vs.12 if=iscsi_vmk@vmk2 addr=10.16.xxx.xxx:3260 (TPGT:65536 ISID:0x11) (T0 C34) Reason=5
2020-12-28T10:06:49Z iscsid: Login Failed: iqn.1992-08.com.netapp:vs.12 if=iscsi_vmk@vmk2 addr=10.16.xxx.xxx:3260 (TPGT:65536 ISID:0x11) Reason: 00050204 Target Error: (0x0204 Requested ITN has been removed and no forwarding address is provided.)
 
vmkernel.log:
2020-12-28T09:53:23.926Z cpu5:2097954)WARNING: iscsi_vmk: iscsivmk_ConnReceiveAtomic:526: Conn [CID: 0 L: 10.90.xxx.xxx:24672 R: 10.16.xxx.xxx:3260]
2020-12-28T09:53:23.926Z cpu5:2097954)iscsi_vmk: iscsivmk_ConnRxNotifyFailure:1235: vmhba68:CH:14 T:0 CN:0: Connection rx notifying failure: Failed to Receive. State=Bound
2020-12-28T09:53:23.926Z cpu5:2097954)iscsi_vmk: iscsivmk_ConnRxNotifyFailure:1236: Sess [ISID: TARGET: (null) TPGT: 0 TSIH: 0]
2020-12-28T09:53:23.926Z cpu5:2097954)iscsi_vmk: iscsivmk_ConnRxNotifyFailure:1237: Conn [CID: 0 L: 10.90.xxx.xxx:24672 R: 10.16.xxx.xxx:3260]
2020-12-28T09:53:23.926Z cpu2:2097956)WARNING: iscsi_vmk: iscsivmk_ConnReceiveAtomic:517: vmhba68:CH:15 T:0 CN:0: Failed to receive data: Connection closed by peer

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.