hwassist becomes inactive with "Fail to bind UDP socket" after ONTAP upgrade
Applies to
- AFF A220
- Baseboard Management Controller (BMC)
- Models without e0S using node management IP
- ONTAP upgrade from 9.7 to 9.9.1
- BMC firmware version 11.11 (fixed in CFBMC-4204)
Issue
- After upgrading ONTAP from version 9.7 to 9.9.1, hwassist becomes inactive with the error "Fail to bind UDP socket".
Cluster::*> storage failover hwassist show
Node
-----------------
node-01
Partner: node-02
Hwassist Enabled: true
Hwassist IP: 10.210.181.159
Hwassist Port: 4444
Monitor Status: active
Inactive Reason: -
Corrective Action: -
Keep-Alive Status: healthy
node-02
Partner: node-01
Hwassist Enabled: true
Hwassist IP: 10.210.181.158
Hwassist Port: 4444
Monitor Status: inactive
Inactive Reason: Fail to bind UDP socket.
Corrective Action: Run 'storage failover modify -hwassist-partner-ip <node-02's node management IP> -node node-01' and/or run 'storage failover modify -hwassist-partner-port <node-02's UDP port> -node node-01'
Keep-Alive Status: -
2 entries were displayed.
Cluster::*> storage failover hwassist show
Node
-----------------
node-01
Partner: node-02
Hwassist Enabled: true
Hwassist IP: 10.210.181.159
Hwassist Port: 4444
Monitor Status: inactive
Inactive Reason: Fail to bind UDP socket.
Corrective Action: Run 'storage failover modify -hwassist-partner-ip <node-01's node management IP> -node node-02' and/or run 'storage failover modify -hwassist-partner-port <node-01's UDP port> -node node-02'
Keep-Alive Status: -
node-02
Partner: node-01
Hwassist Enabled: true
Hwassist IP: 10.210.181.158
Hwassist Port: 4444
Monitor Status: active
Inactive Reason: -
Corrective Action: -
Keep-Alive Status: healthy
2 entries were displayed.
- The BMC firmware version is 11.11, which is the fixed version (CFBMC-4204), but it does not recover within 120 seconds.