Skip to main content
NetApp Knowledge Base

How to enable switch data collection for cluster switches with RADIUS authentication?

  1. Last updated
  2. Save as PDF
Views:
331
Visibility:
Public
Votes:
0
Category:
fabric-interconnect-and-management-switches
Specialty:
core
Last Updated:

Applies to

  • ONTAP 9.7P13
  • Cluster Network Switches
  • RADIUS Server

Answer

Just an "admin" user can be used for cluster switch log collection setup: 

::*> system cluster-switch log setup-password
Enter the switch name: switch_name.netapp.com(xxxxxxxxxxx)
RSA key fingerprint is 00:11:22:33:44:55:66:77:88:99:aa:bb:cc:dd:ee:ff
Do you want to continue? {y|n}:: y
Enter the password: <switch admin password>
Enter the password again: <switch admin password>

Additional Information

Errors received:

::> cluster-switch log show
...
switch password error

::> system health alert show
...
SwitchAccess_Alert

 

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.