Skip to main content
NetApp Knowledge Base

SSD disk missing

Last Updated:

Applies to

  • FAS / AFF


  • Autosupport alert generated for (FILESYSTEM DISK MISSING) ERROR
[Node-01: config_failed_disk: callhome.fdsk.missing:error]: Call home for FILESYSTEM DISK MISSING
  • Sysconfig -a shows no information for the missing disk

00.3 : NETAPP   X670_S163315TATE NA04 14651.0GB 520B/sect (XXXXXXXXXXXXX)
00.5 : NETAPP   X670_S163315TATE NA04 14651.0GB 520B/sect (XXXXXXXXXXXXX)

  • EMS log shows ONTAP previously tried powercycling the disk to recover it before invalidating it

[Node-01: pmcsas_timeout_0: sas.adapter.debug:info]: params: {'debug_string': 'Device 0a.00.4 is present and powered up but is about to be invalidated (20) -- power cycling.', 'adapterName': '0a'}
[Node-01: pmcsas_asyncd_0: sas.adapter.debug:info]: params: {'debug_string': 'Powercycle on device 0d.00.4 complete: status 0', 'adapterName': '0a'}
[Node-01: pmcsas_asyncd_0: sas.adapter.debug:info]: params: {'debug_string': 'Starting powercycle on device 0a.00.4', 'adapterName': '0a'}

  • EMS log shows disk is missing

[Node-01: config_thread: raid.config.filesystem.disk.missing:info]: File system Disk 0d.00.4 Shelf 0 Bay 4 [NETAPP   X670_S163315TATE NA04] S/N [XXXXXXXXXXXXX] UID [5002538A:47A5B2C0:00000000:00000000:00000000:00000000:00000000:00000000:00000000:00000000] is missing.

  • Multiple power cycles seen on the disk in sasadmin expander_phy_state

::> system node run -node * -command sasadmin expander_phy_state

Expander phy state on 0a.0 (NETAPP  :DS22412IOM12A    SHFHUXXXXXXXXXXX):
                              Pwr         Invald Disprt Loss   Phy    CRC    Phy                    
                          Pwr Ccl Rsv Rls DWord  Error  Sync   Reset  Error  Change SATA            
PHY/BAY STATE             ON  Cnt Cnt Cnt Count  Count  Count  Prob   Cnt    Cnt    Affiliation     
------- ----------------- --- --- --- --- ------ ------ ------ ------ ------ ------ ----------------
20/4    Rate unknown      YES 84  0   0

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.