Skip to main content
NetApp Knowledge Base

Why do System Manager and CLI show different Flash Cache NVMe capacity size

  1. Last updated
  2. Save as PDF
Views:
302
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
CORE
Last Updated:

Applies to

  • ONTAP 9
  • X3311A Flash Cache NVMe card

Answer

  • System Manager shows Flash Cache NVMe usable size.
  • ONTAP CLI shows Flash Cache NVMe capacity size.

Example:

System Manager show Flash Cache NVMe usable size 880GB

Flash Cache.jpg

CLI shows Flash Cache NVMe capacity size  is 1024G.

sysconfig: slot 1 OK: X3311A: M.2 1TB NVMe Drive
slot 1: Flash Cache NVMe
Serial Number: SXXYXXXXXXXX
Part Number: 119-00329
Hardware Revision: B0
Firmware Version: NA01
Firmware File: X3311_S000PM983NVM
Model Name: X3311A
Capacity: 1024 GB
State: ok

Additional Information

 

 

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.