Skip to main content
NetApp Knowledge Base

What is the difference of the PSU alert in ASUP between Shelf and Node

Views:
429
Visibility:
Public
Votes:
0
Category:
fas-systems
Specialty:
hw
Last Updated:

Applies to

  • FAS8200
  • FAS2620
  • DS212C

Answer

  • Shelf like DS212C or DS2246 raises the following ASUP alerts when PSU failure.

Example:

(SHLEF POWER INTERRUPTED) ERROR
(SHELF_FAULT) ERROR

 

  • Node like FAS8200 or FAS6XXX and FAS3XXX raises the following ASUP alerts when PSU failure.

Example:

(CHASSIS POWER SUPPLY OFF:PS1) ERROR
(CHASSIS POWER SUPPLY DEGRADED:PS1)ERROR

  • Node like FAS2XXX has onboard IOM and internal shelf, so it raises the following ASUP alerts when PSU failure.

Example:

(SHLEF POWER INTERRUPTED) ERROR
(SHELF_FAULT) ERROR
(CHASSIS POWER DEGRADED:Power Supply Status Critical:PSU1) ERROR

 

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.