Skip to main content
NetApp Knowledge Base

What are the part numbers for AFF A400, C400, ASA A400, C400, FAS8300

  1. Last updated
  2. Save as PDF
Views:
12,766
Visibility:
Public
Votes:
0
Category:
fas-systems
Specialty:
hw
Last Updated:

Applies to

  • AFF A400, AFF C400
  • ASA A400, ASA C400
  • FAS8300
  • ONTAP 9

Answer

Part Type Part Description Part Number Comments
Boot Media M.2,SATA,FLASH,480GB X3323A  
Chassis Chassis,W/MIDPLANE/FAN,A400,8300/8700 X3164A DO NOT SEND - Fans included
Chassis Chassis,W/MIDPLANE,NO FAN,A400,8300/8700 X3165A No fans
Chassis Fan Fan Module,Enclosure,A320   X3190A 4 fan modules in front of chassis for each controller slot: A1-A4, B1-B4.
AFF A320 uses the same part.
Memory DIMM, 32GB X93144A Maximum: 4 (Slots: 2, 4, 13, 15)
Before replacing system memory, ensure the PPR process was followed.
NVDIMM NVDIMM, 16GB X93143A Maximum: 1 (Slot 11)
Mezzanine cards 25G Ethernet X1161A Ports: e0e, e0f, e0g, e0h
Mezzanine cards 16GB FC X1162A Ports: 0e, 0f, 0g, 0h
Motherboard Controller,No MEM,AFF-A400,FAS8300 X3189A No PSUs, DIMMs, NVRAM battery, boot device, mezzanine
Check MB P/N: 111-05250, 111-04198, 111-04199
Controller,No MEM,AFF-A400,FAS8300,VER2 X3189B No PSUs, DIMMs, NVRAM battery, boot device, mezzanine
Check MB P/N: 111-05235, 111-05236
X3189A (Original) and X3189B (VER2) MB FRUs can be mixed in the same chassis - you just need to ensure ONTAP version supports VER2 (in HWU) and if it is a FAS8300, you need to potentially add 2TB Flash Cache (if they have 2 x 1TB Flash Caches in Slots 6 and 7). If there is a "stock out" situation, you might be forced to mix versions in the chassis to satisfy SLAs.
Motherboard Controller,No MEM,No SAS,AFF-C400 X3226A For AFF-C400, ASA-C400 only - No PSUs, DIMMs, etc.
Check MB P/N: 111-05075, 111-05076
Controller,No MEM,No SAS,AFF-C400,VER2  X3226B For AFF-C400, ASA-C400 only - No PSUs, DIMMs, etc
Check MB P/N: 111-05229, 111-05230
X3226A (Original) and X3226B (VER2) MB FRUs can be mixed in the same chassis - you just need to ensure ONTAP version supports VER2 (in HWU). If there is a "stock out" situation, you might be forced to mix versions in the chassis to satisfy SLAs.
Motherboard Controller,MEM,A400,8300 X3209A DO NOT SEND - PSUs, DIMMs, battery, boot device included
NVRAM Battery Batt,LI-ION,7.2V,2-CELL,CYL,GEN5 X3156A  
See KB: AFF A400/FAS8300 BATTERY (wrong charge) WARNING
Power Supply PSU,AFF A700s,A800,EF600,EF300 (Platinum) X737A Delta DPS-1600AB-18
LITEON PS-2162-8F
Power Supply,1600W,Titanium (Titanium) X97602A Delta TDPS-1600GB
QCS DCJ16002-06
IMPORTANT: Intermixing PSUs with different efficiencies in the same chassis is not supported. When replacing a PSU, the correct part must be used or damage to the system might occur.  How to determine 1600W PSU power efficiency
RTC Battery Lithium, CR2032, R6 X1847-R6  

 

SU512: ONTAP support requirements for VER2 hardware

Additional Information

 

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.