Skip to main content
NetApp Knowledge Base

SP not reachable for every other node when running system node power show command

  1. Last updated
  2. Save as PDF
Views:
283
Visibility:
Public
Votes:
0
Category:
fas-systems
Specialty:
HW
Last Updated:

Applies to

  • ONTAP 9.8 and earlier

Issue

  • When connecting to the cluster_mgmt LIF, the following errors are reported for all other nodes:
::> system node power show

Error: The Service Processor on node "nodeB" is not reachable. Verify that the SP or BMC is online, verify that api-service is enabled on the SP or
BMC, verify that the partner node is running, check if pings from SP or BMC to partner node work, check if hw-assist keep-alives are normal,
check that network ports are configured correctly and are functional (up). Then, try the command again.
nodeB -

  • The node hosting the cluster_mgmt LIF reports the output

nodeA on

  • When connecting to another node via management LIF the problem is not seen and the output is returned from all nodes

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.