Skip to main content
NetApp Knowledge Base

Node reboot due to faulty PCI Card in an incorrect slot

  1. Last updated
  2. Save as PDF
Views:
8
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
hw
Last Updated:

Applies to

  • ONTAP 9
  • AFF 700s
  • X2071A card

Issue

  • The node "Node1" experienced a reboot and panic due to a faulty PCI card installed in an unsupported slot.

PANIC: PCI Error NMI from device(s): ErrSrcID(CorrSrc(0), UCorrSrc(0x8010)), RPT(128,2,0): Br[6f04](128,2,0): Link down in process idle: cpu8 on release 9.11.1P8(C) on Sat Sep 6 04:27:46 UTC 2025

  • The X2071A PCI card was installed in slot 4, which is not supported for this card.

sysconfig: 4x12Gb miniSAS HD HBA card (PN X2071A) in slot 4 must be in one of these slots: 2,3,5.
Sep 05 06:17:31 [sat09-a700s-saphan-1-01n02:cmds.sysconf.logErr:notice]: sysconfig: 4x12Gb miniSAS HD HBA card (PN X2071A) in slot 4 must be in one of these slots: 2,3,5.

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.