Skip to main content
NetApp Knowledge Base

Multiple disk failures with error 200000h on one path for one node only

Last Updated:

Applies to

  • FAS8020
  • ONTAP 9.7P2
  • IOM6


  • Several disk failures on one particular path for particular shelves
  • None of the disks show any medium error or any other issue that point"s to a disk failure, but failed due to latency.
  • Disks are marked for failure with the following message: “disk_latency_monitor: scsi.debug:debug]: shm_setup_for_failure disk 0b.04.8     (S/N Pxxxx) error 200000h” and are being copied out when it is their turn and if spare is available.
  • The partner accesses the disks without a problem via another IOM path.


Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.